GRNSHREDR-6.000R0.00-12.0KIT12.7-G20AB1 (0636856)


Price:
Sale price$42.16
Stock:
In stock (43 units), ready to be shipped

Description

The 'Green' line of tooling is designed specifically for cutting wrought aluminum alloys (Non-Ferrous)

The 'Shredder' line is a general purpose high-speed roughing and finishing tool designed for machine tools capable of spindle speeds greater than 20K rpm.

'R' form tools are the classic end-mill shape, straight sides (flanks) with corners ranging from sharp (flat tip) to completely round (ball tip). This form is the most common of all, and good for almost everything.

Tool Properties
Name GRNSHREDR-6.000R0.00-12.0KIT12.7-G20AB1 (0636856)
EDP # 0636856
Material Wrought Aluminum
Application General Milling >20k RPM (Shredder)
Form End Mill - Flat
Cutting Diameter 0.2362" 6.000 mm
Corner Radius 0.0000" 0.000 mm
Taper per Side 0.0°
Length of Cut 0.4724" 12.000 mm
Reach 0.4724" 12.000 mm
Minimum Extension 0.5" 12.7 mm
Maximum Extension 1.6" 41.3 mm
Shank Diameter h6 0.2500" 6.350 mm
Overall Length 2.0" 51 mm
Cutting Edges 5

Cutting Parameters - General Roughing @42K
Coolant Low Pressure
Tool Extension (Stickout) 0.9843" 25.000 mm
Step Over (Radial, Ae) 0.0984" 2.500 mm
Step Down (Axial, Ap) 0.1575" 4.000 mm
Spindle Speed (S) 42000 RPM
Feed Rate (F) 236 in/min 6000 mm/min
Cutting Speed (Vc) 2597 ft/min 792 m/min
Mat. Removal Rate (MRR): 3.66 in³/min 60.0 cm³/min

Cutting Parameters - General Finishing @42K
Coolant Low Pressure
Tool Extension (Stickout) 0.9843" 25.000 mm
Step Over (Radial, Ae) 0.0039" 0.100 mm
Step Down (Axial, Ap) 0.1575" 4.000 mm
Spindle Speed (S) 42000 RPM
Feed Rate (F) 79 in/min 2000 mm/min
Cutting Speed (Vc) 2597 ft/min 792 m/min

You may also like...

Recently viewed