The 'Green' line of tooling is designed specifically for cutting wrought aluminum alloys (Non-Ferrous)
Note that these tools are made out of ceramic material and have completely different cutting properties compared to regular tungsten carbide cutting tools. In general, cutting speeds and material removal rates may be much higher, however it is important that the tool path design and cutting conditions are carefully controlled.
The 'Looper' line is designed for aggressive flank roughing and machine tools capable of spindle speeds greater than 20K rpm.
'R' form tools are the classic end-mill shape, straight sides (flanks) with corners ranging from sharp (flat tip) to completely round (ball tip). This form is the most common of all, and good for almost everything.
|Material||Wrought Aluminum||Application||Rough Flank Milling >20k RPM (Looper)|
|Form||End Mill - Bull / Rounded Corner|
|Cutting Diameter||0.4724"||12.000 mm|
|Corner Radius||0.0394"||1.000 mm|
|Taper per Side||0°|
|Length of Cut||0.5118"||13.000 mm|
|Minimum Extension||1.5"||39.0 mm|
|Maximum Extension||2.5"||63.3 mm|
|Shank Diameter h6||0.4724"||12.000 mm|
|Overall Length||3.2"||82 mm|