Description
The 'Purple' line of tooling is designed specifically for cutting wrought titanium alloys.
The 'Feeder' line is designed for aggressive feed-mill roughing. This line of cutting tools is not designed to produce finish surfaces, but rather to achieve maximum material removal rates using the entire face of the tool and a relatively shallow depth of cut per pass combined with high feed rates and a special profile which takes advantage of axial chip thinning.
'F' form tools are intended for feed-milling; shallow cutting at high feed. They have back-relieved flanks and are not intended to be used to cut past their widest point.
Tool Properties | ||
---|---|---|
Name | PURFEEDER-4.000F0.02-16.5HAW17.0-G25AB1 (0681975) | |
EDP # | 0681975 | |
Material | Titanium | Application | Rough Feed Millling (Feeder) |
Form | Feed Mill | |
Cutting Diameter | 0.1575" | 4.000 mm |
Equivalent Corner Rad | 0.0008" | 0.020 mm |
Taper per Side | 0.0° | |
Length of Cut | 0.0118" | 0.300 mm |
Reach | 0.6496" | 16.500 mm |
Minimum Extension | 0.7" | 17.0 mm |
Maximum Extension | 2.1" | 54.0 mm |
Shank Diameter h6 | 0.2500" | 6.350 mm |
Overall Length | 2.5" | 63 mm |
Cutting Edges | 2 |