Description
The 'Green' line of tooling is designed specifically for cutting wrought aluminum alloys (Non-Ferrous)
The 'Cruiser' line is a tight-tolerance 3D finishing tool which is intended for flanking; primarily using the side of the tool to generate final part geometry. This line is intended for machine tools with spindles capable of speeds above 20K rpm.
'W' form tools are tapered-flank, flat faced endmills.
Tool Properties | ||
---|---|---|
Name | GRNCRUISR-1.500W9.05-1STEPFORM-G20CG1 | |
EDP # | 0735073 | |
Material | Wrought Aluminum | Application | Finish Flank Milling >20k RPM (Cruiser) |
Form | Tapered Flat-Tip End Mill | |
Cutting Diameter | 0.0591" | 1.500 mm |
Cutting Length | 0.3563" | 9.050 mm |
Taper per Side | 0.0° | |
Length of Cut | 0.3563" | 9.050 mm |
Reach | (No flank reach limit) | |
Minimum Extension | 0.5" | 12.7 mm |
Maximum Extension | 1.6" | 41.3 mm |
Shank Diameter h6 | 0.2500" | 6.350 mm |
Overall Length | 2.0" | 51 mm |
Cutting Edges | 3 | |
Tolerance Class | h6 |