Description
The 'Green' line of tooling is designed specifically for cutting wrought aluminum alloys (Non-Ferrous)
The 'Pecker' line is for general drilling and tapping.
'D' form indicates that the tool is intended for drilling/plunging, and will not cut laterally.
Tool Properties | ||
---|---|---|
Name | GRNPECKER-1.820D6.00-9.00PEK16.0-G20CG1 | |
EDP # | 0735074 | |
Material | Wrought Aluminum | Application | General Drilling, Tapping (Pecker) |
Form | Drill | |
Cutting Diameter | 0.0717" | 1.820 mm |
Cutting Length | 0.2362" | 6.000 mm |
Taper per Side | 0.0° | |
Length of Cut | 0.2362" | 6.000 mm |
Reach | 0.3543" | 9.000 mm |
Minimum Extension | 0.6" | 16.0 mm |
Maximum Extension | 1.6" | 41.3 mm |
Shank Diameter h6 | 0.2500" | 6.350 mm |
Overall Length | 2.0" | 51 mm |
Cutting Edges | 2 | |
Tolerance Class | h7 |