GRNBEATER-3.175V31.8-999.MAG39.1-J35CE1 (0643413)


Price:
Sale price$187.69
Stock:
In stock (17 units), ready to be shipped

Description

The 'Green' line of tooling is designed specifically for cutting wrought aluminum alloys (Non-Ferrous)

The 'Beater' line is designed for aggressive roughing and machine tools capable of spindle speeds greater than 20K rpm. The Beater incorporates our proprietary flute surface treatment producing a high lubricity finish specially optimized to handle a wide variety of cutting conditions and our special blend of fully variable geometry (including helix, pitch, spacing, location and size) as well as aggressive chip breakers designed to reduce chip size. This line of cutting tools is not designed to produce finish surfaces, but rather to achieve maximum material removal rates.

'V' form tools are excellent for milling in confined areas and have optimal strength and stiffness properties for deep slotting and flanking. Typically combined with 5-axis simultaneous tool paths in the aerospace industry and for other complex forms, they are also commonly used on 3-axis machines for generating drafted walls; especially in the mold making industry.

Tool Properties
Name GRNBEATER-3.175V31.8-999.MAG39.1-J35CE1 (0643413)
EDP # 0643413
Material Wrought Aluminum
Application Rough 3D Milling w/ Chip Breakers >20k RPM (Beater)
Form Tapered Ball-Nose End Mill
Cutting Diameter 0.1250" 3.175 mm
Cutting Length 1.2520" 31.800 mm
Taper per Side 5.0°
Length of Cut 1.2520" 31.800 mm
Reach (No flank reach limit)
Minimum Extension 1.5" 39.1 mm
Maximum Extension 2.9" 74.6 mm
Shank Diameter h6 0.3750" 9.525 mm
Overall Length 3.5" 89 mm
Cutting Edges 3
<!-CUTTING PARAMS=====================================================>
Cutting Parameters - Flank Roughing @30K
Coolant Low Pressure
Tool Extension (Stickout) 1.8110" 46.000 mm
Step Over (Radial, Ae) 0.0551" 1.400 mm
Step Down (Axial, Ap) 1.2402" 31.500 mm
Spindle Speed (S) 30000 RPM
Feed Rate (F) 276 in/min 7000 mm/min
Cutting Speed (Vc) 982 ft/min 299 m/min
Mat. Removal Rate (MRR): 17.91 in³/min 293.6 cm³/min

Cutting Parameters - Slot Roughing @30K
Coolant Low Pressure
Tool Extension (Stickout) 1.8110" 46.000 mm
Step Down (Axial, Ap) 1.2402" 31.500 mm
Spindle Speed (S) 30000 RPM
Feed Rate (F) 59 in/min 1500 mm/min
Cutting Speed (Vc) 982 ft/min 299 m/min
Mat. Removal Rate (MRR): 16.34 in³/min 267.7 cm³/min

Cutting Parameters - Flank Finishing @6.5K
Coolant Low Pressure
Tool Extension (Stickout) 0.7500" 19.050 mm
Step Over (Radial, Ae) 0.0039" 0.100 mm
Step Down (Axial, Ap) 0.5512" 14.000 mm
Spindle Speed (S) 6500 RPM
Feed Rate (F) 8 in/min 200 mm/min
Cutting Speed (Vc) 213 ft/min 65 m/min
>

You may also like...

Recently viewed