GRNDRIFTR-2.500S0.56-0637758-G20AB1 (0637758)


Price:
Sale price$49.56
Stock:
In stock (2 units), ready to be shipped

Description

The 'Green' line of tooling is designed specifically for cutting wrought aluminum alloys (Non-Ferrous)

The 'Drifter' line is for T-slotting; generating lateral slots/grooves in faces using the tool flank.

'S' form tools are for slotting and grooving, using the tool flank exclusively to produce geometry.

Tool Properties
Name GRNDRIFTR-2.500S0.56-0637758-G20AB1 (0637758)
EDP # 0637758
Material Wrought Aluminum
Application General T-Slot Milling (Drifter)
Form Slot Mill
Cutting Diameter 0.0984" 2.500 mm
Slot Thickness 0.0220" 0.560 mm
Taper per Side 0.0°
Length of Cut 0.0984" 2.500 mm
Reach 0.5354" 13.600 mm
Minimum Extension 0.6" 15.0 mm
Maximum Extension 1.6" 41.3 mm
Shank Diameter h6 0.2500" 6.350 mm
Overall Length 2.0" 51 mm
Cutting Edges 5
<!-CUTTING PARAMS=====================================================>
Cutting Parameters - Flank Finishing @42K
Coolant Low Pressure
Tool Extension (Stickout) 0.5906" 15.000 mm
Step Over (Radial, Ae) 0.0150" 0.381 mm
Step Down (Axial, Ap) 0.0300" 0.762 mm
Spindle Speed (S) 42000 RPM
Feed Rate (F) 98 in/min 2500 mm/min
Cutting Speed (Vc) 1082 ft/min 330 m/min
>

You may also like...

Recently viewed