Description
The 'Orange' line of tooling is designed specifically for cutting nickel-based high temperature superalloys.
The 'Striper' line is a general purpose roughing and finishing designed for machine tools with spindles reach up to 20K rpm. The design incorporates our proprietary flute surface treatment producing a high lubricity finish specially optimized to handle a wide variety of cutting conditions and our special blend of fully variable geometry (including helix, pitch, spacing, location and size).
'R' form tools are the classic end-mill shape, straight sides (flanks) with corners ranging from sharp (flat tip) to completely round (ball tip). This form is the most common of all, and good for almost everything.
| Tool Properties | ||
|---|---|---|
| Name | HAW25G3.175R1.59 | |
| EDP # | 0458550 | |
| Material | High-Temp Super-Alloys | Application | General Milling <20k RPM (Striper) |
| Form | End Mill - Ball | |
| Cutting Diameter | 0.1250" | 3.175 mm |
| Corner Radius | 0.0626" | 1.590 mm |
| Taper per Side | 0.0° | |
| Length of Cut | 0.2441" | 6.200 mm |
| Reach | 0.2441" | 6.200 mm |
| Minimum Extension | 1.1" | 27.7 mm |
| Maximum Extension | 2.1" | 54.0 mm |
| Shank Diameter h6 | 0.2500" | 6.350 mm |
| Overall Length | 2.5" | 63 mm |
| Cutting Edges | 4 | |