GRNSTRIPR-9.525R0.00-25.7BUZ32.0-J25AB1 (0637043)


Price:
Sale price$115.85
Stock:
In stock (23 units), ready to be shipped

Description

The 'Green' line of tooling is designed specifically for cutting wrought aluminum alloys (Non-Ferrous)

The 'Striper' line is a general purpose roughing and finishing designed for machine tools with spindles reach up to 20K rpm. The design incorporates our proprietary flute surface treatment producing a high lubricity finish specially optimized to handle a wide variety of cutting conditions and our special blend of fully variable geometry (including helix, pitch, spacing, location and size).

'R' form tools are the classic end-mill shape, straight sides (flanks) with corners ranging from sharp (flat tip) to completely round (ball tip). This form is the most common of all, and good for almost everything.

Tool Properties
Name GRNSTRIPR-9.525R0.00-25.7BUZ32.0-J25AB1 (0637043)
EDP # 0637043
Material Wrought Aluminum
Application General Milling <20k RPM (Striper)
Form End Mill - Flat
Cutting Diameter 0.3750" 9.525 mm
Corner Radius 0.0000" 0.000 mm
Taper per Side 0.0°
Length of Cut 1.0118" 25.700 mm
Reach 1.0118" 25.700 mm
Minimum Extension 1.3" 32.0 mm
Maximum Extension 1.9" 49.2 mm
Shank Diameter h6 0.3750" 9.525 mm
Overall Length 2.5" 63 mm
Cutting Edges 3
<!-CUTTING PARAMS=====================================================>
Cutting Parameters - Flank Roughing @20K
Coolant Low Pressure
Tool Extension (Stickout) 1.2500" 31.750 mm
Step Over (Radial, Ae) 0.0780" 1.980 mm
Step Down (Axial, Ap) 0.8248" 20.950 mm
Spindle Speed (S) 20000 RPM
Feed Rate (F) 79 in/min 2000 mm/min
Cutting Speed (Vc) 1963 ft/min 598 m/min
Mat. Removal Rate (MRR): 5.06 in³/min 83.0 cm³/min

Cutting Parameters - Slot Roughing @20K
Coolant High Pressure
Tool Extension (Stickout) 1.2500" 31.750 mm
Step Down (Axial, Ap) 0.8248" 20.950 mm
Spindle Speed (S) 20000 RPM
Feed Rate (F) 39 in/min 991 mm/min
Cutting Speed (Vc) 1963 ft/min 598 m/min
Mat. Removal Rate (MRR): 12.07 in³/min 197.8 cm³/min

Cutting Parameters - Flank Finishing @20K
Coolant Low Pressure
Tool Extension (Stickout) 1.2500" 31.750 mm
Step Over (Radial, Ae) 0.0039" 0.100 mm
Step Down (Axial, Ap) 0.8248" 20.950 mm
Spindle Speed (S) 20000 RPM
Feed Rate (F) 31 in/min 787 mm/min
Cutting Speed (Vc) 1963 ft/min 598 m/min
>

You may also like...

Recently viewed