The 'Orange' line of tooling is designed specifically for cutting nickel-based high temperature superalloys.
The 'Striper' line is a general purpose roughing and finishing designed for machine tools with spindles reach up to 20K rpm. The design incorporates our proprietary flute surface treatment producing a high lubricity finish specially optimized to handle a wide variety of cutting conditions and our special blend of fully variable geometry (including helix, pitch, spacing, location and size).
'R' form tools are the classic end-mill shape, straight sides (flanks) with corners ranging from sharp (flat tip) to completely round (ball tip). This form is the most common of all, and good for almost everything.
|Name||HAW25G2.381R1.19 (SPED0332-2.5in) (0409120)|
|Material||High-Temp Super-Alloys||Application||General Milling <20k RPM (Striper)|
|Form||End Mill - Bull / Rounded Corner|
|Cutting Diameter||0.0937"||2.381 mm|
|Corner Radius||0.0469"||1.190 mm|
|Taper per Side||0.0°|
|Length of Cut||0.2008"||5.100 mm|
|Minimum Extension||1.1"||27.5 mm|
|Maximum Extension||2.1"||54.0 mm|
|Shank Diameter h6||0.2500"||6.350 mm|
|Overall Length||2.5"||63 mm|