GRNENGRVR-0.800C90.0-0637757-G20AB1 (0637757)

Sale price$34.76
In stock (45 units), ready to be shipped


The 'Green' line of tooling is designed specifically for cutting wrought aluminum alloys (Non-Ferrous)

The 'Engraver' line is for engraving, and is also suitable for chamfering and deburring.

'C' form tools are for chamfering and deburring, available in a large array of tip angles.

Tool Properties
Name GRNENGRVR-0.800C90.0-0637757-G20AB1 (0637757)
EDP # 0637757
Material Wrought Aluminum
Application Finish Chamfer/Deburr/Engrave (Engraver)
Form Chamfer Tool
Cutting Diameter 0.0315" 0.800 mm
Angle per Side 3.5433" 90.000 mm
Taper per Side 90.00°
Length of Cut 0.0315" 0.800 mm
Reach 0.2236" 5.680 mm
Minimum Extension 0.6" 14.8 mm
Maximum Extension 1.5" 38.1 mm
Shank Diameter h6 0.2500" 6.350 mm
Overall Length 2.0" 51 mm
Cutting Edges 1

Cutting Parameters - Corner Chamfering
Coolant Low Pressure
Tool Extension (Stickout) 0.5906" 15.000 mm
Step Over (Radial, Ae) 0.0028" 0.070 mm
Step Down (Axial, Ap) 0.0028" 0.070 mm
Spindle Speed (S) 42000 RPM
Feed Rate (F) 59 in/min 1500 mm/min
Cutting Speed (Vc) 346 ft/min 106 m/min

You may also like...

Recently viewed