Description
The 'Green' line of tooling is designed specifically for cutting wrought aluminum alloys (Non-Ferrous)
The 'Drifter' line is for T-slotting; generating lateral slots/grooves in faces using the tool flank.
'S' form tools are for slotting and grooving, using the tool flank exclusively to produce geometry.
| Tool Properties | ||
|---|---|---|
| Name | GRNDRIFTR-2.500S0.56-0637758-G20AB1 | |
| EDP # | 0637758 | |
| Material | Wrought Aluminum | Application | General T-Slot Milling (Drifter) |
| Form | Slot Mill | |
| Cutting Diameter | 0.0984" | 2.500 mm |
| Slot Thickness | 0.0220" | 0.560 mm |
| Taper per Side | 0.0° | |
| Length of Cut | 0.0984" | 2.500 mm |
| Reach | 0.5354" | 13.600 mm |
| Minimum Extension | 0.6" | 15.0 mm |
| Maximum Extension | 1.6" | 41.3 mm |
| Shank Diameter h6 | 0.2500" | 6.350 mm |
| Overall Length | 2.0" | 51 mm |
| Cutting Edges | 5 | |
| Tolerance Class | null | |
| Cutting Parameters - Flank Finishing @42K | ||
| Coolant | Low Pressure | |
| Tool Extension (Stickout) | 0.5906" | 15.000 mm |
| Step Over (Radial, Ae) | 0.0150" | 0.381 mm |
| Step Down (Axial, Ap) | 0.0300" | 0.762 mm |
| Spindle Speed (S) | 42000 RPM | |
| Feed Rate (F) | 98 in/min | 2500 mm/min |
| Cutting Speed (Vc) | 1082 ft/min | 330 m/min |