Description
The 'Green' line of tooling is designed specifically for cutting wrought aluminum alloys (Non-Ferrous)
The 'Drifter' line is for T-slotting; generating lateral slots/grooves in faces using the tool flank.
'R' form tools are the classic end-mill shape, straight sides (flanks) with corners ranging from sharp (flat tip) to completely round (ball tip). This form is the most common of all, and good for almost everything.
| Tool Properties | ||
|---|---|---|
| Name | GRNDRIFTR-12.68R0.88-0643002-N25AB1 | |
| EDP # | 0643002 | |
| Material | Wrought Aluminum | Application | General T-Slot Milling (Drifter) |
| Form | End Mill - Bull / Rounded Corner | |
| Cutting Diameter | 0.4992" | 12.680 mm |
| Corner Radius | 0.0346" | 0.880 mm |
| Taper per Side | 0.0° | |
| Length of Cut | 0.5000" | 12.700 mm |
| Reach | 1.1417" | 29.000 mm |
| Minimum Extension | 1.3" | 32.0 mm |
| Maximum Extension | 1.5" | 38.1 mm |
| Shank Diameter h6 | 0.5000" | 12.700 mm |
| Overall Length | 2.5" | 63 mm |
| Cutting Edges | 6 | |
| Tolerance Class | h7 | |