Description
The 'Grey' line of tooling is designed specifically for cutting hardened/tool steels.
The 'Striper' line is a general purpose roughing and finishing designed for machine tools with spindles reach up to 20K rpm. The design incorporates our proprietary flute surface treatment producing a high lubricity finish specially optimized to handle a wide variety of cutting conditions and our special blend of fully variable geometry (including helix, pitch, spacing, location and size).
'C' form tools are for chamfering and deburring, available in a large array of tip angles.
| Tool Properties | ||
|---|---|---|
| Name | GRYSTRIPR-6.000C120.-0658807-G40CE1 (0658807) | |
| EDP # | 0658807 | |
| Material | Tool Steel, Hardened Steel | Application | General Milling <20k RPM (Striper) |
| Form | Chamfer Tool | |
| Cutting Diameter | 0.2362" | 6.000 mm |
| Angle per Side | 4.7244" | 120.000 mm |
| Taper per Side | 0.0° | |
| Length of Cut | 0.4331" | 11.000 mm |
| Reach | 3.0315" | 77.000 mm |
| Minimum Extension | 0.6" | 14.0 mm |
| Maximum Extension | 3.5" | 88.9 mm |
| Shank Diameter h6 | 0.2500" | 6.350 mm |
| Overall Length | 4.0" | 101 mm |
| Cutting Edges | 4 | |