Description
The 'Green' line of tooling is designed specifically for cutting wrought aluminum alloys (Non-Ferrous)
The 'Grazer' line is a tight-tolerance 3D finishing tool intended for machine tools with spindle speeds up to 20K rpm and which can be used for almost anything.
'P' form tools are spherical and are supported by a neck which is smaller than the maximum cutting diameter. These are typically used to generate geometry in ports or other difficult to reach features/faces.
| Tool Properties | ||
|---|---|---|
| Name | GRNGRAZER-10.00P8.60-120.OST126.-N60CG1 (0659466) | |
| EDP # | 0659466 | |
| Material | Wrought Aluminum | Application | Finish 3D Milling <20k RPM (Grazer) |
| Form | Spherical / Porting / 'Lolipop' | |
| Cutting Diameter | 0.3937" | 10.000 mm |
| Neck Diameter | 0.3386" | 8.600 mm |
| Taper per Side | 0.0° | |
| Length of Cut | 0.3386" | 8.600 mm |
| Reach | 4.7244" | 120.000 mm |
| Minimum Extension | 5.0" | 126.0 mm |
| Maximum Extension | 5.2" | 133.0 mm |
| Shank Diameter h6 | 0.5000" | 12.700 mm |
| Overall Length | 6.0" | 152 mm |
| Cutting Edges | 2 | |