Description
The 'Blue' line of tooling is designed specifically for cutting plain steels.
The 'Striper' line is a general purpose roughing and finishing designed for machine tools with spindles reach up to 20K rpm. The design incorporates our proprietary flute surface treatment producing a high lubricity finish specially optimized to handle a wide variety of cutting conditions and our special blend of fully variable geometry (including helix, pitch, spacing, location and size).
'R' form tools are the classic end-mill shape, straight sides (flanks) with corners ranging from sharp (flat tip) to completely round (ball tip). This form is the most common of all, and good for almost everything.
| Tool Properties | ||
|---|---|---|
| Name | BLUSTRIPR-8.000R1.50-27.0CTZ27.0-I24_52140085 (0644223) | |
| EDP # | 0644223 | |
| Material | Steel | Application | General Milling <20k RPM (Striper) |
| Form | End Mill - Bull / Rounded Corner | |
| Cutting Diameter | 0.3150" | 8.000 mm |
| Corner Radius | 0.0591" | 1.500 mm |
| Taper per Side | 0.0° | |
| Length of Cut | 0.3543" | 9.000 mm |
| Reach | 1.0630" | 27.000 mm |
| Minimum Extension | 1.1" | 27.0 mm |
| Maximum Extension | 1.9" | 49.0 mm |
| Shank Diameter h6 | 0.3150" | 8.000 mm |
| Overall Length | 2.4" | 61 mm |
| Cutting Edges | 6 | |