Description
The 'Green' line of tooling is designed specifically for cutting wrought aluminum alloys (Non-Ferrous)
The 'Striper' line is a general purpose roughing and finishing designed for machine tools with spindles reach up to 20K rpm. The design incorporates our proprietary flute surface treatment producing a high lubricity finish specially optimized to handle a wide variety of cutting conditions and our special blend of fully variable geometry (including helix, pitch, spacing, location and size).
'R' form tools are the classic end-mill shape, straight sides (flanks) with corners ranging from sharp (flat tip) to completely round (ball tip). This form is the most common of all, and good for almost everything.
| Tool Properties | ||
|---|---|---|
| Name | GRNSTRIPR-2.705R0.00-18.0TUR25.4-I49CG1 (0730965) | |
| EDP # | 0730965 | |
| Material | Wrought Aluminum | Application | General Milling <20k RPM (Striper) |
| Form | End Mill - Flat | |
| Cutting Diameter | 0.1065" | 2.705 mm |
| Corner Radius | 0.0000" | 0.000 mm |
| Taper per Side | 0.0° | |
| Length of Cut | 0.5118" | 13.000 mm |
| Reach | 0.7087" | 18.000 mm |
| Minimum Extension | 1.0" | 25.4 mm |
| Maximum Extension | 4.3" | 108.0 mm |
| Shank Diameter h6 | 0.3150" | 8.000 mm |
| Overall Length | 4.9" | 125 mm |
| Cutting Edges | 2 | |