Description
The 'Green' line of tooling is designed specifically for cutting wrought aluminum alloys (Non-Ferrous)
The 'Edger' line is for chamfering and deburring.
'C' form tools are for chamfering and deburring, available in a large array of tip angles.
| Tool Properties | ||
|---|---|---|
| Name | GRNEDGERR-6.350C60.0-999.AUF12.7-G20CG1 | |
| EDP # | 0764460 | |
| Material | Wrought Aluminum | Application | Finish Chamfer/Deburr (Edger) |
| Form | Chamfer | |
| Cutting Diameter | 0.2500" | 6.350 mm |
| Total Tip Angle | 60.00° | |
| Taper per Side | 30.00° | |
| Length of Cut | 0.0461" | 1.170 mm |
| Reach | (No flank reach limit) | |
| Minimum Extension | 0.5" | 12.7 mm |
| Maximum Extension | 1.5" | 38.1 mm |
| Shank Diameter h5 | 0.2500" | 6.350 mm |
| Overall Length | 2.0" | 51 mm |
| Cutting Edges | 4 | |
| Tolerance Class | h6 | |